LOCK-OUT/TAG-OUT - GENERAL
Lock-out/Tag/out is a program which will ensure that machines and equipment
are not accidentally engaged while someone is working on them. Employees
performing this procedure will receive specific formal training annually.
PROCEDURE
1. If the machine or equipment is in operation, shut it down by the normal
stopping procedure (stop button, toggle switch, etc.).
2. Disconnect the equipment from its energy source.
3. Lock-out and/or tag-out the energy isolating device.
4. Ensure that no personnel are exposed. Engage the normal operating
control (button, switch, etc.) to confirm that the equipment will not
operate. Return the operating control to off position.
5. The equipment is now locked-out and/or tagged-out.
After servicing is complete and equipment is ready for reenergization:
1. Ensure no personnel are exposed.
2. Install guards if necessary. Remove lock-out and tag-out devices.
This should be done only by the person who installed them originally.
3. Reconnect the equipment to it's energy source.
4.Verify that the equipment operates properly.
If for some reason the employee who installed the lock-out/tag-out devices
is not available to remove them, the devices may be removed under the
direction of the supervisor, following a strict procedure.
-
- Go
to page 10
-
- Return
to the table of contents
|
